At present, with the continuous development of the economy, more and more people choose to install the iron guardrail, because it has the advantages of beauty, protection and so on, which are deeply loved by the majority of consumers in the market. How much do you know about it? Do you know the factors that affect the installation of the guardrail? Don't you understand? Next, follow the iron guardrail manufacturer Kerry guardrail to understand the following content.

　　1. 地面超級平坦

　　1. Super flat ground

　　對地面進行超平整，以防止立柱不平整，影響網孔的安裝，拉動鋼絲使立柱安裝成直線。

　　The ground shall be super leveled to prevent the uneven column from affecting the installation of mesh, and the column shall be installed in a straight line by pulling the steel wire.

　　2. 護欄產品是否符合圖紙要求

　　2. Whether the guardrail products meet the drawing requirements

　　工人施工時，需要檢查施工現場的護欄產品，總體尺寸、護欄規格是否符合圖紙要求，如不符合，需要及時聯系濟南鐵藝護欄廠家，確認是護欄產品進行調整，還是調整安裝方案

　　During construction, workers need to check whether the guardrail products, overall dimensions and specifications on the construction site meet the requirements of drawings. If they do not meet the requirements, they need to contact Jinan iron guardrail manufacturer in time to confirm whether the guardrail products are adjusted or the installation scheme is adjusted

　　3.混凝土質量

　　3. Concrete quality

　　在施工現場確認混凝土質量，是否符合施工要求，以免影響工程質量。

　　Confirm the concrete quality at the construction site to see if it meets the construction requirements, so as not to affect the project quality.

　　4. 坑間距

　　4. hole spacing

　　護欄產品坑距確認及調整，確保護欄產品安裝準確、順利，現場超平整。

　　Confirm and adjust the pit distance of guardrail products to ensure the installation of guardrail products is accurate and smooth, and the site is super flat.

　　5. 外部環境的變化

　　5. Changes in the external environment

　　使鐵藝護欄松動，如立柱固定位置本身松動，用的螺絲不是不銹鋼防腐螺絲，螺絲腐蝕造成松動。

　　Make the iron guardrail loose. For example, the fixed position of the column itself is loose. The screws used are not stainless steel anti-corrosion screws, which are corroded to cause looseness.

　　6. 澆注和振動的時間和方法

　　6. Time and method of pouring and vibration

　　應仔細檢查和測量模板，確保模板平整、干凈，并均勻涂抹脫模劑，放置護欄柱，澆筑混凝土，在模板維修期間，嚴禁錘擊，嚴禁加壓，防止變形

　　Carefully check and measure the formwork to ensure that it is flat and clean, evenly apply release agent, place guardrail column and pour concrete. During formwork maintenance, it is strictly prohibited to hammer, pressurize and prevent deformation

　　撕開模具

　　Rip up the mold

　　混凝土干透后拆模，開始安裝護欄網

　　After the concrete is completely dry, the formwork shall be removed and the guardrail net shall be installed

　　8. 由外部環境造成的松動，如受到強大的外力沖擊、臺風的影響，或單純的人為破壞。

　　8. The looseness caused by the external environment, such as the impact of strong external forces, typhoon, or simple man-made damage.

　　以上就是對影響濟南鐵藝護欄安裝的詳細介紹，想要了解更多請點擊官網http://www.lpylmy.com

　　The above is a detailed introduction of the impact on the installation of Jinan iron guardrail. For more information, please click http://www.lpylmy.com