公司新聞
hengye
企業案例
case
聯系我們
- 聯系人:濟南燕翔鐵藝制品有限公司
- 手機:15953126901
- 電話:18615254757
- 郵箱:785385551@qq.com
- 地址:濟南市天橋區歷山北路黃臺不銹鋼市場3區317
影響濟南輕型鋼結構構建廠房成本的因素都有哪些?
來源:http://www.lpylmy.com 日期:2020-04-13 發布人: 瀏覽次數:34次
濟南輕型鋼結構廠房一般用于大型生產企業,在施工周期中,工程質量遠遠優于傳統廠房,而且它還可以回收利用,在環保方面也有很大的意義,但影響其價格的因素有哪些呢?
Jinan light steel structure workshop is generally used in large-scale production enterprises. In the construction period, the project quality is far better than the traditional workshop, and it can also be recycled, which is also of great significance in environmental protection, but what are the factors that affect its price?
1、周邊結構,這也是需要考慮的成本,門窗、外墻等。
1. Peripheral structure, which is also the cost to be considered, such as doors and windows, external walls, etc.
2. 根據實際需要,建筑高度每增加10cm,成本增加2% - 3%。
2. According to the actual needs, the cost increases by 2% - 3% for every 10 cm increase in building height.
3、鋼結構跨度長度,一般來說,跨度越大,成本越低。當然,跨距是根據自己的需要來安排的,設計也不一樣,跨距也不一樣,當然,對立柱間距的要求也有很大的不同。
3. Generally speaking, the larger the span, the lower the cost. Of course, the span is arranged according to their own needs, the design is not the same, the span is not the same, of course, the requirements for column spacing are also very different.
4. 無論是否有起重機噸位,選擇起重機噸位也是一個很好的選擇。如果選擇的噸位太大,會造成設備的浪費,而且太小,無法滿足施工需要。
4. Whether there is crane tonnage or not, selecting crane tonnage is also a good choice. If the tonnage selected is too large, it will cause waste of equipment, and it is too small to meet the construction needs.
5. 相關因素如設計結構類型、時間和建筑用途等。
5. Relevant factors such as design structure type, time and building use, etc.
6、鋼的需求量、鋼結構車間的成本對鋼的需求量有很大的影響。
6. The demand of steel and the cost of steel structure workshop have a great influence on the demand of steel.
7,建筑面積的大小,這是本質上的影響,鋼鐵的大小面積大,所需的鋼結構車間成本相對高,寬度的區域的大小,當然,與植物的結構設計是密切相關的。
7. The size of the building area, which is essentially the impact of the large size of steel, the relatively high cost of the steel structure workshop required, the size of the wide area, of course, is closely related to the structural design of plants.
鋼結構車間在施工前,要做嚴格的成本核算,建議統一管理不會造成這么大的損失,鋼結構車間的成本會容易得多。、
Before the construction of steel structure workshop, strict cost accounting should be done. It is suggested that unified management will not cause such a big loss, and the cost of steel structure workshop will be much easier. ,
以上就是對影響濟南輕型鋼結構構建廠房成本的因素的詳細介紹,想要了解更多請點擊官網http://www.lpylmy.com
The above is a detailed introduction to the factors affecting the cost of Jinan light steel structure factory building. For more information, please click http://www.lpylmy.com
下一篇:濟南鐵藝護欄常見焊接形式都有哪些? 上一篇:對濟南鐵藝大門進行焊制出現氣泡的原因?